LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> F-Pace S >> Repair and Diagnosis >> External Pages >> Different car >> Section 151 (Engine Cooling - INGENIUM I4 2.0L Diesel -- XE (X760)) >> Engine Cooling - INGENIUM I4 2.0L Diesel >> Diagnosis And Testing >> Component Tests >> Radiator Leak Test - Removed From The Vehicle

Radiator Leak Test - Removed From The Vehicle

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do not leak test an aluminum radiator in the same water that is used to leak test copper/brass radiators. Flux and caustic cleaners may be present in the test water which will corrode aluminum. If a separate tank is not available, drain and rinse the test tank before testing an aluminum radiator.

Clean the radiator before leak testing to prevent contamination of the test tank. Leak test the radiator in clean water with 138 kPa (20 psi) air pressure

scientia non olet · About LEMON Manuals