LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> F-Pace S >> Repair and Diagnosis >> External Pages >> Different car >> Section 151 (Engine Cooling - INGENIUM I4 2.0L Diesel -- XE (X760)) >> Engine Cooling - INGENIUM I4 2.0L Diesel >> Block Heater >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure contains installation details.
  1. Disconnect the battery ground cable.

    Refer to: Battery Disconnect and Connect .

  2. Raise and support the vehicle.
    WARNING: Make sure to support the vehicle with axle stands.
  3. Refer to: Thermostat .
  4. G11307180
  5. CAUTION: Be prepared to collect escaping coolant.
    G11307181

    Torque: 55 Nm 

scientia non olet · About LEMON Manuals