Warning Indicators

The Anti-lock Brake System (ABS) control module operates the Electric Park Brake (EPB) warning indicators using High Speed (HS) Controller Area Network (CAN) powertrain messages to the Instrument Cluster (IC). When the EPB is applied in the static mode, the warning indicator stays on red while the ignition is on, and the indicator stays on for 30 seconds after the ignition goes off. All faults are shown by the fault lamps below the speedometer. The EPB lamp flashes red if the EPB is in an unknown position, for example if it was not possible to complete an actuation. All warning indications are accompanied by a related message displayed in the message center and a warning chime.