LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> F-Pace First Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 285 (Fuel Charging & Controls - Turbocharger - INGENIUM I4 2.0L Petrol - F-Pace) >> Fuel Charging And Controls - Turbocharger - INGENIUM I4 2.0L Petrol >> Removal And Installation >> Turbocharger Oil Supply Tube >> Removal

Turbocharger Oil Supply Tube: Removal

WARNING: This page is about a different car, the 2018 Jaguar F-Pace. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This procedure contains some variation in the illustrations depending on the vehicle specifications, but the essential information is always correct.
  1. Raise and support the vehicle on a suitable 2 post lift.

    Refer to: LIFTING .

  2. Remove the accessory drive belt.

    Refer to: ACCESSORY DRIVE BELT .

  3. WARNING: Be prepared to collect escaping oil.
    G11307874
    • Release the turbocharger oil feed pipe.
    • Remove and discard the banjo bolt and washers.
  4. WARNING: Be prepared to collect escaping oil.
G11307900
scientia non olet · About LEMON Manuals