LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> F-Pace First Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 228 (Fuel Tank & Lines - INGENIUM I4 2.0L Petrol -- XE (X760)) >> Fuel Tank And Lines - INGENIUM I4 2.0L Petrol >> Fuel Tank Filler Pipe >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
    • Install the fuel filler pipe.
    • Install the 3 retaining nuts.

      Torque Specification: 10 Nm 

    • Secure the 2 retaining clips to the fuel filler pipe.
    • Secure the clamp to the fuel filler pipe.
  2. Secure the fuel pipe to the fuel filler pipe.
    • Secure the breather hose to the 5 retaining clips.
    • Install the rear right wheel arch liner.
    • Install the 8 retaining clips and 2 retaining screws.
  5. Install the wheel and tire assembly.

    Refer to: Wheel and Tire .

  6. Fill the fuel system.
  7. Connect the startup battery ground cable.

    Refer to: Battery Disconnect and Connect .

scientia non olet · About LEMON Manuals