LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> F-Pace First Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Transfer Case - Vehicles With: 8HP70 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD -- XE (X760)) >> Transfer Case - Vehicles With: 8HP70 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD >> Description And Operation >> Operation >> Multiplate Clutch

Multiplate Clutch

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

The multiplate clutch comprises an inner drive hub, a clutch basket and set of drive/reaction plates and friction plates.

The friction plates are located on splines on the input shaft and rotate when the input shaft is rotating. The drive plates are located on splines in the clutch basket which is positively attached to the front drive gear.

The front drive sprocket and clutch basket are located on bearings to allow speed difference relative to the input shaft when no locking torque is applied.

When the vehicle is moving the:

Torque is not applied to the front driveshaft until the TCCM engages the multiplate clutch. The front drive gear is attached to the front output shaft by the drive chain.

scientia non olet · About LEMON Manuals