Engine Cooling - V6 S/C 3.0L Petrol: Specifications
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Coolant must be collected into a clean container and can be reused if not contaminated.
| DESCRIPTION | SPECIFICATION |
|---|---|
| Jaguar Premium Cooling System Fluid | WSS-M97B44-D |
| Jaguar Premium Cooling System Flush | EGR-M14P7-A |
| Jaguar Premium Cooling System Fluid concentration | 50% |
ENGINE CAPACITY
| ENGINE | CAPACITY (DRY) | CAPACITY (FILL) |
|---|---|---|
| 3.0L supercharger | 13.5 Liters | 8.6 Liters |
TORQUE SPECIFICATION:
| DESCRIPTION | NM | LB-FT | LB-IN |
|---|---|---|---|
| Coolant expansion tank retaining bolt | 7 | - | 62 |
| Cooling fan motor and shroud retaining nuts | 9 | - | 80 |
| Electric thermostat housing retaining bolt | 9 | - | 80 |
| Coolant pump retaining bolts | 11 | 8 | - |
| Radiator retaining bolts | 9 | - | 80 |
| Radiator drain plug | 2 | - | 18 |
| Coolant bleed | screw(s) | 3 | 27 |