LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> F-Pace First Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 210 (Engine Cooling - V6 S/C 3.0L Petrol -- XE (X760)) >> Engine Cooling - V6 S/C 3.0L Petrol >> Cooling Fan Motor And Shroud >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Cooling fans may continue to operate after the engine is turned off. They may also start to operate after the engine is turned off and continue operating for up to 10 minutes.
NOTE:
  • Some variation in the illustrations may occur, but the essential information is always correct.
  • Removal steps in this procedure may contain installation details.
  • Some components shown removed for clarity.
  1. Refer to: Battery Disconnect and Connect .
  2. Raise and support the vehicle.
    WARNING: Make sure to support the vehicle with axle stands.
  3. Refer to: Left Air Cleaner .
  4. G11307229

    Torque Specification: 3.5 Nm 

  5. G11307230
  6. G11307231

    Torque Specification: 9 Nm 

  7. G11307232
  8. G11307233
  9. Refer to: Cooling System Draining, Filling And Bleeding .
  10. Refer to: Air Deflector .
  11. CAUTION: Be prepared to collect escaping coolant.
    G11307234
  12. G11307235
  13. CAUTION: Be prepared to collect escaping coolant.
    G11307236
  14. G11307237
  15. CAUTION: Be prepared to collect escaping coolant.
    G11307238

    Torque Specification: 9 Nm 

  16. G11307239

    Torque Specification: 9 Nm 

  17. G11307240
  18. CAUTION: Protect the radiator during this operation.
    G11307241
  19. G11307151
scientia non olet · About LEMON Manuals