LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> F-Pace First Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 210 (Engine Cooling - V6 S/C 3.0L Petrol -- XE (X760)) >> Engine Cooling - V6 S/C 3.0L Petrol >> Block Heater >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the block heater.

    Torque Specification: 55 Nm 

  2. Install the exhaust manifold.

    Refer to: Left Exhaust Manifold .

  3. Fill the coolant system.

    Refer to: Cooling System Draining and Vacuum Filling .

  4. Connect the startup battery ground cable.

    Refer to: Battery Disconnect and Connect .

scientia non olet · About LEMON Manuals