Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
This procedure contains illustrations showing certain components removed to provide extra clarity.

Raise and support the vehicle on a suitable 2 post lift.
Refer to: Lifting .
Remove the engine cover.
Refer to: Engine Cover - Ingenium I4 2.0L Petrol .
Drain the cooling system.
Refer to: Cooling System Draining, Filling and Bleeding .
Remove the Noise, Vibration and Harshness (NVH) pad.
CAUTION: Be prepared to collect escaping coolant.

Release the coolant hoses.
Remove the coolant outlet hose from the thermostat housing.
Remove the coolant bypass hose from the thermostat housing.
Disconnect the electrical connectors.

Remove the thermostat housing.