LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> F-Pace First Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Engine Cooling - INGENIUM I4 2.0L Petrol -- XE (X760)) >> Engine Cooling - INGENIUM I4 2.0L Petrol >> Block Heater (G2033416) >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the block heater.

    Torque Specification: 55 Nm 

  2. Connect the electrical connector.
  3. Install the generator.

    Refer to: Generator .

  4. Connect the startup battery ground cable.

    Refer to: Battery Disconnect and Connect .

  5. Fill the cooling system.

    Refer to: Cooling System Partial Draining and Vacuum Filling .

scientia non olet · About LEMON Manuals