Coolant Pump: Removal

NOTE:

This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
This procedure contains illustrations showing certain components removed to provide extra clarity.

Disconnect the startup battery ground cable.
Refer to: BATTERY DISCONNECT AND CONNECT (General Procedures).
Raise and support the vehicle on a suitable 2 post lift.
Refer to: LIFTING .
Drain the cooling system
Refer to: COOLING SYSTEM DRAINING AND VACUUM FILLING (General Procedures).
Remove the left air cleaner outlet pipe.
Refer to: LEFT AIR CLEANER OUTLET PIPE .
Remove the left air cleaner.
Refer to: LEFT AIR CLEANER .
1. Disconnect the coolant pump electrical connector.
2. Release the 2 wiring harness clips.
CAUTION: Be prepared to collect escaping coolant.

Disconnect the 2 coolant hose.

Remove the bolt and release the coolant pump.