LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> F-Pace First Edition >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Supercharger Cooling - V6 S/C 3.0L Petrol - F-Pace >> Supercharger Cooling - V6 S/C 3.0L Petrol >> Removal And Installation >> Coolant Pump >> Installation

Coolant Pump: Installation

  1. Install the coolant pump.

    Torque: 9 Nm 

  2. Connect the 2 coolant hoses.
    1. Connect the coolant pump electrical connector.
    2. Install the 2 wiring harness clips.
  4. Install the left air cleaner outlet pipe.

    Refer to: LEFT AIR CLEANER OUTLET PIPE .

  5. Install the left air cleaner.

    Refer to: LEFT AIR CLEANER .

  6. Fill the cooling system.

    Refer to: COOLING SYSTEM DRAINING AND VACUUM FILLING .

  7. Connect the startup battery ground cable.

    Refer to: BATTERY DISCONNECT AND CONNECT (General Procedures).

scientia non olet · About LEMON Manuals