Rear Suspension Height Sensor (G1311848): Removal
NOTE:
Removal steps in this procedure may contain installation details.
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- Refer to: Wheel and Tire (Removal and Installation).
-
CAUTION:
- RH illustration shown, LH is similar.
- Before disconnecting or removing the components, make sure the area around the joint faces and connections are clean.
-
CAUTION: RH illustration shown, LH is similar.
Torque: 4 Nm
-
CAUTION: RH illustration shown, LH is similar.