Air Suspension Compressor (G1311859): Removal
WARNING:
The air suspension is pressurised. Make sure dirt or grease does not enter the system. Always wear hand, eye and ear safety standard protection when working on the system.
CAUTION:
Do not depressurise the air suspension system before raising the vehicle.
NOTE:
Removal steps in this procedure may contain installation details.
- Refer to: Air Suspension System Depressurize and Pressurize (General Procedures).
- Refer to: Air Suspension Solenoid Valve Block (Removal and Installation).
-
CAUTION: Using a suitable blanking plug, blank off the end of the air pipe to prevent dirt ingress.
A new air line connector must be installed.
Refer to: Air Line Connector (General Procedures).
Torque Specification: 3.5 Nm
-
CAUTION: Using a suitable blanking plug, blank off the end of the air pipe to prevent dirt ingress.
A new air line connector must be installed.
Refer to: Air Line Connector .
Suspension, General Procedures).
Torque Specification: 3.5 Nm
Torque Specification: 9 Nm