LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2016 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Electronic Engine Controls - V8 N/A 5.0L Petrol -- XJ/X351) >> Removal And Installation >> Engine Coolant Temperature (ECT) Sensor (G1269256) >> Removal

Engine Coolant Temperature (ECT) Sensor (G1269256): Removal

WARNING: This page is about a different car, the 2013 Jaguar XJ, 2012 Jaguar XJ, 2011 Jaguar XJ, and 2010 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. Refer to ENGINE COVER - V8 5.0L PETROL/V8 S/C 5.0L PETROL (Removal and Installation).
  3. Refer to COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING (G1816935) .
  4. Refer to SECONDARY BULKHEAD PANEL LH (Removal and Installation).
  5. NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
    G11293301
scientia non olet · About LEMON Manuals