LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2016 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Electronic Engine Controls - V8 N/A 5.0L Petrol -- XJ/X351) >> Removal And Installation >> Catalyst Monitor Sensor RH (G1269253) >> Removal

Catalyst Monitor Sensor RH (G1269253): Removal

WARNING: This page is about a different car, the 2013 Jaguar XJ, 2012 Jaguar XJ, 2011 Jaguar XJ, and 2010 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

    Raise and support the vehicle.

  2. Refer to AIR DEFLECTOR (Removal and Installation).
  3. CAUTION: Note the fitted position of the component prior to removal.
    G11293293
  4. CAUTION: Make sure that the mating faces are clean and free of foreign material.
    G11293294

    Torque Specification  : 48 Nm 

scientia non olet · About LEMON Manuals