LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2016 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Cooling - V6 S/C 3.0L Petrol -- XJ/X351) >> Engine Cooling - V6 S/C 3.0L Petrol >> Removal And Installation >> Cooling Fan Motor And Shroud (G1557001) >> Removal

Cooling Fan Motor And Shroud (G1557001): Removal

WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Removal steps in this procedure may contain installation details.
  • Some variation in the illustrations may occur, but the essential information is always correct.
  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. Refer to: Radiator Splash Shield (Removal and Installation).
  3. Refer to: Air Deflector (Removal and Installation).
  4. Refer to: Air Cleaner Outlet Pipe T-Connector .

  5. Refer to: Air Cleaner LH (Removal and Installation).
  6. Refer to: Air Cleaner RH (Removal and Installation).
  7. Refer to: Air Cleaner Outlet Pipe LH (Removal and Installation).
  8. Refer to: Air Cleaner Outlet Pipe RH . (Removal and Installation).
  9. G11285542
  10. G11285543
  11. G11285544

    Torque Specification: 7 Nm 

  12. G11285545
  13. G11287832
scientia non olet · About LEMON Manuals