LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2016 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- XJ/X351) >> Electronic Engine Controls - V6 S/C 3.0 L Petrol >> Post Catalyst Heated Oxygen Sensor (Ho2S) - AWD (G1559436) >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Observe due care when working near a hot exhaust system.
NOTE:
  • Removal steps in this procedure may contain installation details.
  • Left-hand shown, right-hand similar.
  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. Refer to: CATALYTIC CONVERTER LH - RWD & CATALYTIC CONVERTER LH - AWD .
  3. CAUTION: Make sure that the mating faces are clean and free of corrosion and foreign material.
    G11291508

    Special Tool(s):  310-121

    Torque Specification: 48 Nm 

scientia non olet · About LEMON Manuals