LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2016 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- XJ/X351) >> Electronic Engine Controls - V6 S/C 3.0 L Petrol >> Engine Coolant Temperature (ECT) Sensor (G1550193) >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: Engine Cover - V6 S/C 3.0L Petrol (Removal and Installation).
  2. Refer to: Secondary Bulkhead Panel LH (Removal and Installation).
  3. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  4. Refer to: COOLING SYSTEM PARTIAL DRAINING, FILLING AND BLEEDING (General Procedures).
  5. NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
    G11293301
scientia non olet · About LEMON Manuals