LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2016 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- XJ/X351) >> Electronic Engine Controls - V6 S/C 3.0 L Petrol >> Description And Operation >> Electronic Engine Controls - System Operation And Component Description (G1772584) >> Engine Coolant Temperature (ECT) Sensor >> ECT 1

ECT 1

WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.

ECT 1 is installed in the heater manifold, at the rear of the bank 1 cylinder head. The input from this sensor is used in calibration tables and by other systems.

If there is an ECT 1 fault, the ECM adopts an estimated coolant temperature. On the second consecutive trip with an ECT 1 fault, the ECM illuminates the MIL.

scientia non olet · About LEMON Manuals