Possible Causes
WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Monitor description. Integrity check of transmission control module signal.
- This DTC is set when the powertrain control module has detected a failure when comparing two or more input parameters for plausibility.
- Transmission control module power or ground circuit open circuit, high resistance
- Transmission control switch power or ground circuit open circuit, high resistance
- High speed CAN bus (powertrain) circuit short circuit to ground, short circuit to power, open circuit, high resistance
- Transmission system fault
- Transmission control switch fault