Possible Causes
WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
This DTC is set when the powertrain control module has determined failures where a data bus is not available.
- High speed CAN bus failure
- High speed CAN bus circuit, short circuit to ground, short circuit to power, open circuit
- The powertrain control module has not received the expected CAN signal from the steering angle sensor control module within the specified time interval
- CAN harness link between powertrain control module and steering angle sensor control module network malfunction