P0350-85 - Ignition Coil Primary/Secondary Circuit/Open - Signal above allowable range: Action
WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
- Vehicle Conditions to enable DTC Logging strategy
- Ignition on
- Prioritised Checks to Perform
- Check powertrain control module for additional DTCs and refer to relevant DTC index. Rectify these first
- Refer to the applicable SYSTEM WIRING DIAGRAMS and check the power and ground connections to the module
- Check and install a new powertrain control module as required. Using the Jaguar Land Rover approved diagnostic equipment, configure the powertrain control module as a new module
- Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest