Powertrain Control Module (Pcm) - 3.0L Petrol: Notes
WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Fuel injector voltage will reach 65 volts during operation and have a high current requirement.
CAUTION:
Diagnosis by substitution from a donor vehicle is NOT
acceptable. Substitution of control modules does not guarantee confirmation of a fault, and may also cause additional faults in the vehicle being tested and/or the donor vehicle.
NOTE:
If a control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual, or determine if any prior approval program is in operation, prior to the installation of a new module/component.
The information below lists all Diagnostic Trouble Codes (DTCs) that could be logged in the Powertrain Control Module (PCM). For additional diagnosis and testing information, refer to the relevant Diagnosis and Testing. For additional information, refer to "V6 S/C 3.0L Petrol" - DIAGNOSIS AND TESTING .