Front Muffler (G1551300): Removal
WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Observe due care when working near a hot exhaust system.
NOTE:
Removal steps in this procedure may contain installation details.
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
-
NOTE: The procedure must be carried out on both sides.
Refer to:REAR MUFFLER (G1551301) .
Torque Specification: 7 Nm
Torque Specifications:
Bolts 30 Nm
Nuts 10 Nm
Torque Specification: 55 Nm
-
CAUTION: Do not carry out this step if a new exhaust is to be installed.
Remove the retaining clamps using a suitable tool.