LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2016 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Exhaust System - V6 S/C 3.0L Petrol -- XJ/X351) >> Exhaust System - V6 S/C 3.0L Petrol >> Removal And Installation >> Exhaust System - RWD (G1551299) >> Removal

Exhaust System - RWD (G1551299): Removal

WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Observe due care when working near a hot exhaust system.
NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. Refer to: Air Deflector .
  3. G11292568

    Torque Specification: 7 Nm 

  4. G11291965
  5. G11292249
  6. G11292571
  7. G11292540

    Torque Specification: 40 Nm 

  8. G11292558

    Torque Specification: 40 Nm 

  9. CAUTION: Make sure that the exhaust system is supported with suitable retaining straps.
    NOTE:
    • LH illustration shown, RH is similar.
    • The step must be carried out on both sides.
    G11292574
  10. G11292575

    Torque Specification: 30 Nm 

  11. G11292576

    Torque Specifications: 

    Bolts 30 Nm 

    Nuts 10 Nm 

  12. G11292577
  13. NOTE: Do not disassemble further if the component is removed for access only.
    G11292578

    Special Tool(s):  310-121

    Torque Specification: 48 Nm 

  14. G11292579

    Torque Specification: 18 Nm 

scientia non olet · About LEMON Manuals