LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2016 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine - V6 S/C 3.0L Petrol -- XJ/X351) >> Engine - V6 S/C 3.0L Petrol >> Rear Dynamic Balancer (G1779109) >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
  1. G11286996
  2. CAUTION: Make sure the timing marks are aligned.
    G11286993
  3. G11286994

    Torque Specifications: 

    Stage 1: 25 Nm 

    Stage 2: 38° 

  4. CAUTION: Install all the bolts finger tight before final tightening.
    G11286999
  5. G11287000

    Tighten bolts in the sequence shown.

    Torque Specifications: 25 Nm 

  6. G11287001

    Tighten remaining bolts.

    Torque Specifications: 25 Nm 

  7. Refer to: OIL PUMP (G1557028) .
scientia non olet · About LEMON Manuals