LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2016 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine - V6 S/C 3.0L Petrol -- XJ/X351) >> Engine - V6 S/C 3.0L Petrol >> Oil Pump (G1557028) >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
  1. G11285222
    • Lubricate and install the new O-ring seals.
  2. G11285224

    Torque Specifications: 

    M6 12 Nm 

    M8 25 Nm 

  3. G11285225
    • Lubricate and install a new O-ring seal.
  4. G11285226

    Torque Specifications: 12 Nm 

  5. G11286865

    Torque Specifications: 21 Nm 

  6. G11286873
    • Install the lower timing chain making sure the coloured chain links align correctly with the fuel rail high-pressure fuel pumps camshaft, balance shaft and crankshaft sprocket markings.
  7. CAUTION: Make sure that the tensioner spring is correctly located.
    G11285218

    Torque Specifications: 21 Nm 

  8. Refer to: OIL PAN EXTENSION - RWD (G1557027) .

    Refer to: OIL PAN - AWD (G1569239) .

  9. Disconnect the battery ground cable.

    Refer to: BATTERY DISCONNECT AND CONNECT .

scientia non olet · About LEMON Manuals