LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2016 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine - V6 S/C 3.0L Petrol -- XJ/X351) >> Engine - V6 S/C 3.0L Petrol >> Oil Pan - RWD (G1779629) >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: A new O-ring seal is to be installed.
    G11287029

    Torque Specifications: 12 Nm 

  2. CAUTION:
    • Make sure that the mating faces are clean and free of foreign material.
    • Use only a plastic scraper when removing the sealing material.
    G11287031
    • Apply RTV sealant (Loctite 5901G or Loctite 5900) in a 2-3mm diameter to the areas shown, and tighten the bolts within 7 minutes.
  3. NOTE: Tighten the bolts in the indicated sequence.
    G11287032

    Torque Specifications: 12 Nm 

  4. G11287027
  5. Refer to: ENGINE OIL DRAINING AND FILLING (G1779627) .
  6. Connect the battery ground cable.

    Refer to: BATTERY DISCONNECT AND CONNECT .

scientia non olet · About LEMON Manuals