LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2016 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine - V6 S/C 3.0L Petrol -- XJ/X351) >> Engine - V6 S/C 3.0L Petrol >> FLEXPLATE (G1778956) >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION:
    • Install all the bolts finger tight before final tightening.
    • The bolts can only be used 3 times, mark the bolts with a center punch. If 2 punch marks are visible, discard the bolts.
    • Install the bolts in the noted position.
    NOTE:
    • Make sure that the crankshaft is not rotated.
    • Make sure the crankshaft and flexplate mating faces are clean before installation.
    • Tighten the retaining bolts working diagonally.
    G11286688

    To install, reverse the removal procedure.

    Special Tool(s):  JLR-303-1304

    Torque Specifications: 

    Stage 1: 45 Nm 

    Stage 2: 90° 

  2. Refer to: V6 S/C 3.0L Petrol/V8 5.0L Petrol/V8 S/C 5.0L Petrol Transmission Installation (AWD)

    Refer to: V6 S/C 3.0L Petrol/V8 5.0L Petrol/V8 S/C 5.0L Petrol Transmission -- Installation (RWD) .

scientia non olet · About LEMON Manuals