Removal And Installation: Installation
WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
All vehicles
- Install a new nut and tighten to 48 Nm.
Torque Specifications: 48 Nm
- Torque Specifications: 63 Nm
- Install a new locknut.
Torque Specifications: 18 Nm
Torque Specifications: 18 Nm
Torque Specifications: 10 Nm
Left-hand drive vehicles
Torque Specifications: 100 Nm
-
NOTE: Make sure that this component is installed to the noted removal position.
- Torque Specifications: 35 Nm
- Right-hand side shown, left-hand side similar.
All vehicles
- Refer to: AIR CONDITIONING (A/C) SYSTEM RECOVERY, EVACUATION AND CHARGING .
- Refer to: Air Deflector .
-
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Lower the vehicle on the lift.
- Refer to: Battery Disconnect and Connect