LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2016 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine - V6 S/C 3.0L Petrol -- XJ/X351) >> Engine - V6 S/C 3.0L Petrol >> Engine Mount LH - AWD (G1574169) >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Some variation in the illustrations may occur, but the essential information is always correct.
  • Removal steps in this procedure may contain installation details.
  • LHD illustration shown, RHD is similar.
  1. Refer to: Battery Disconnect and Connect .
  2. Refer to: Air Deflector .
  3. Refer to: FRONT HALFSHAFT LH .
  4. Refer to: STEERING GEAR - AWD (G1574295) .
  5. G11286627

    Special Tool(s):  303-021, 303-662

  6. G11286628

    Torque Specifications: 48 Nm 

  7. CAUTION: Care must be taken to avoid damaging the surrounding components.
    G11286629
    • Raise the engine clear of its LH mount.
  8. NOTE: Do not disassemble further if the component is removed for access only.
    G11286630

    Torque Specifications: 10 Nm 

  9. G11286631

    Torque Specifications: 40 Nm 

scientia non olet · About LEMON Manuals