Removal And Installation: Installation
WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
| 303-021 Engine support bracket |
|
| 303-1435 Engine Lifting Brackets Rear |
|
| 303-1436 Engine Lifting Bracket Front |
NOTE:
- Some variation in the illustrations may occur, but the essential information is always correct.
- Some illustrations may show the engine removed for clarity.
-
NOTE: This step requires the aid of another technician.
Install the engine.
Special Tool(s): 303-1435, 303-1436
Install special tool.
Special Tool(s): 303-021
Torque Specifications: 48 Nm
-
CAUTION: A new O-ring seal is to be installed.
Torque Specifications: 25 Nm
Torque Specifications: 6 Nm
Torque Specifications: 12 Nm
Torque Specifications: 10 Nm
Torque Specifications: 12 Nm
-
CAUTION: A new O-ring seal is to be installed.
Torque Specifications: 18 Nm
-
CAUTION: A new O-ring seal is to be installed.
Torque Specifications: 18 Nm
Remove special tool.
Special Tool(s): 303-1436
Torque Specifications: 25 Nm
Remove special tool.
Special Tool(s): 303-1435
Torque Specifications: 12 Nm
-
CAUTION: Make sure that new sealing washers are installed.
Torque Specifications: 25 Nm
- Refer to: FRONT HALFSHAFT LH (Removal and Installation).
- Refer to: Front Halfshaft RH (Removal and Installation).
- Refer to: TRANSMISSION INSTALLATION (G1551386) (Removal).
- Refer to: Engine Cooling - V6 S/C 3.0L Petrol Cooling Fan Motor And Shroud (G1557001) (Removal and Installation).
- Refer to: Secondary Bulkhead Panel RH (Removal and Installation).
- Refer to: HOOD (Removal and Installation).
- Refer to: AIR CONDITIONING (A/C) SYSTEM RECOVERY, EVACUATION AND CHARGING .
- Refer to: BATTERY DISCONNECT AND CONNECT .
- Refer to: COOLING SYSTEM PARTIAL DRAINING, FILLING AND BLEEDING (G1556999) .
- Refer to: POWER STEERING PUMP .