LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2016 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine - V6 S/C 3.0L Petrol -- XJ/X351) >> Engine - V6 S/C 3.0L Petrol >> Electric Oil Pump (G1785348) >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Removal steps in this procedure may contain installation details.
  • Some components shown removed for clarity.
  1. Disconnect the battery ground cable.

    Refer to: BATTERY DISCONNECT AND CONNECT .

  2. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  3. Refer to: OIL PAN - RWD (G1779629) .

    Refer to: OIL PAN - AWD (G1569239) .

  4. G11287034
  5. G11287035
  6. G11287036
  7. G11287037
  8. G11285425
  9. G11285426
  10. G11285427
  11. CAUTION: Take extra care not to damage the component.
    NOTE: Make sure to use the aluminium lug provided on the timing cover to lever against.
    G11285428
  12. G11287042
  13. CAUTION: Take extra care not to drop the bolt.
    G11287043

    Hold the bolt with a magnet to prevent it from dropping.

  14. G11287044

    Make sure the crankshaft is at the timed position.

  15. multimedia:A supplement to the article is available.
  16. CAUTION: Using a tie strap, make sure the tension is maintained on the timing chain.
    G11287046
  17. CAUTION: Use only a long torx socket or torx driver. Do not use a small torx socket, as it may damage the timing chain.
    G11287047

    Hold the bolt with a magnet to prevent it from dropping.

  18. CAUTION: Take extra care not to damage the oil jet.
    G11287048
  19. CAUTION: Take extra care not to damage the oil jet.
    G11287049
  20. CAUTION: Take extra care not to damage the surrounding components.
    G11287050
  21. CAUTION: Using a suitable tool, lock the component.
    G11287051
  22. G11287052
  23. NOTE: Remove and discard the O-ring seal.
    G11287054
  24. G11287055
  25. G11287056
  26. G11287057
  27. CAUTION: Discard the bolt.
    G11287058
  28. CAUTION: Take extra care not to damage the component.
    G11287059
  29. G11287060
  30. CAUTION: Remove and discard the O-ring seal.
    G11287061
scientia non olet · About LEMON Manuals