Exhaust Manifolds
WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Left (Bank 2) installation shown, right (Bank 1) installation similar.
| ITEM | DESCRIPTION |
|---|---|
| 1 | Cylinder head |
| 2 | Screw (3 off) |
| 3 | Layered gasket |
| 4 | Threaded insert (3 off) |
| 5 | Exhaust manifold |
| 6 | Spacer (4 off) |
| 7 | Bolt (6 off) |
| 8 | Heat shield |
| 9 | Machined spacer (2 off) |
The high silicon molybdenum cast iron exhaust manifolds are unique for each cylinder bank. Each exhaust manifold installation includes a layered metal gasket and heat shields. Spacers on the securing bolts allow the manifolds to expand and contract with changes of temperature while maintaining the clamping loads.