LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2016 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Front Drive HALFSHAFTS -- XJ/X351) >> Front Drive HALFSHAFTS >> Removal And Installation >> HALFSHAFT Bearing (G1569241) >> Removal

HALFSHAFT Bearing (G1569241): Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. Refer to Front Halfshaft RH  (Removal and Installation).
  3. Refer to Radiator Splash Shield (Removal and Installation).
  4. G11284252

    Torque Specification: 7 Nm 

  5. G11284253

    Torque Specification: 9 Nm 

  6. NOTE:
    • Remove and discard the O-ring seal.
    • A new O-ring seal is to be installed.
    G11284254

    Torque Specification: 25 Nm 

scientia non olet · About LEMON Manuals