Transmission Control Module (TCM) And Main Control Valve Body - V6 S/C 3.0L Petrol/V8 5.0L Petrol/V8 S/C 5.0L Petrol (G1451641): Removal
WARNING: This page is about a different car, the 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Be prepared to collect escaping fluid.
CAUTION:
Make sure all suitable safety precautions are taken to protect the TCM and main control valve body electrical connector pins against electrostatic discharge.
NOTE:
Removal steps in this procedure may contain installation details.
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- Refer to TRANSMISSION FLUID PAN, GASKET AND FILTER (G1551382) (Removal and Installation).
Take precautions to avoid any electrostatic charging, which could damage these components.
-
CAUTION: Discard the O ring seal.
-
CAUTION: Discard the bolts.
-
CAUTION: Discard the bolt.
-
CAUTION: Note the fitted position of the component prior to removal.
Special Tool(s): JLR-308-844
-
CAUTION: Discard the bolts.
-
WARNING: Be prepared to collect escaping fluid.NOTE: Note the position of the manual park brake release.