Cooling Module - V8 S/C 5.0L Petrol (G1269158): Removal
NOTE:
- Removal steps in this procedure may contain installation details.
- Some variation in the illustrations may occur, but the essential information is always correct.
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- Refer to: AIR CONDITIONING (A/C) SYSTEM RECOVERY, EVACUATION AND CHARGING .
- Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING (G1816935) .
- Refer to: AIR CLEANER OUTLET PIPE LH (G1189205) .
- Refer to: AIR CLEANER OUTLET PIPE RH (G1189206) .
- Refer to: AIR CLEANER LH (G1271879) .
- Refer to: AIR CLEANER RH (G1271880) .
-
CAUTION: Be prepared to collect escaping coolant.
-
NOTE:
- Remove and discard the O-rings.
- Install new O-ring seals.
Torque Specification: 8 Nm
-
NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
Torque Specification: 9 Nm