LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2015 >> XJR Base >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Tank & Lines - V8 5.0L Petrol/V8 S/C 5.0L Petrol -- XJ/X351 >> Fuel Tank And Lines - V8 5.0L Petrol/V8 S/C 5.0L Petrol >> Removal And Installation >> Fuel Tank Filler Pipe (G1267370) >> Removal

Fuel Tank Filler Pipe (G1267370): Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: PETROL AND PETROL-ETHANOL HEALTH AND SAFETY PRECAUTIONS .
  2. Refer to: Battery Disconnect and Connect (General Procedures).
  3. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  4. G11283757

    Torque Specification: 128 Nm 

  5. G11292681
  6. WARNING: The fuel tank filler inlet is fitted with a non return valve. When removing the flexible filler hose a small amount of fuel will escape, if this is more than 0.5L refit the filler pipe and drain the fuel tank using suitable equipment.
    NOTE: This step is for information only.
    G11292682
  7. G11292683

  8. Torque Specification: 03 Nm 

    G11292684

    Torque Specification: 9 Nm 

  9. G11292685

    Torque Specification: 9 Nm 

  10. G11292686
  11. G11292687
scientia non olet · About LEMON Manuals