LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2015 >> XFR-S >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Electronic Engine Controls - V8 5.0L Petrol/V8 S/C 5.0L Petrol -- XF/X250) >> Electronic Engine Controls - V8 5.0L Petrol/V8 S/C 5.0L Petrol >> Description And Operation >> Electronic Engine Controls - System Operation And Component Description (G1452621) >> Ambient Air Temperature Sensor

Ambient Air Temperature Sensor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Jaguar XFR, 2015 Jaguar XF, 2014 Jaguar XFR, 2014 Jaguar XF, and 2013 Jaguar XFR. However, it is still accessible from the selected car via links, so may be relevant.
G11416891

The AAT (ambient air temperature) sensor is a NTC thermistor that allows the ECM to monitor the temperature of the air around the vehicle. The ECM uses the AAT input for a number of functions, including engine cooling fan control. The ECM also transmits the ambient temperature on the high speed CAN bus for use by other control modules.

The AAT sensor is installed in the LH exterior mirror, with the bulb of the sensor positioned over a hole in the bottom of the mirror casing.

The ECM supplies the sensor with a 5 V reference voltage and a ground, and translates the return signal voltage into a temperature.

If there is a fault with the AAT sensor, the ECM calculates the AAT from the temperature inputs of the MAFT sensors. If the AAT sensor and the temperature inputs of the MAFT sensors are all faulty, the ECM adopts a default ambient temperature of 20 °C (68 °F).