LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2015 >> XFR-S >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Climate Control -- XF/X250) >> Removal And Installation >> Thermostatic Expansion Valve (G1448157) >> Removal

Thermostatic Expansion Valve (G1448157): Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Jaguar XFR, 2015 Jaguar XF, 2014 Jaguar XFR, 2014 Jaguar XF, and 2013 Jaguar XFR. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Removal steps in this procedure may contain installation details.
  • Some variation in the illustrations may occur, but the essential information is always correct.
  1. Disconnect the battery ground cable.

    Refer to: Battery Disconnect and Connect (General Procedures).

  2. Refer to: Climate Control Assembly  (Removal and Installation).
  3. CAUTION: Take extra care not to damage the clips or screw threads. Failure to follow this instruction may result in damage to the climate control assembly.
    G11424478

    Torque Specification: 1.3 Nm 

  4. CAUTION: Take extra care not to damage the clips or screw threads. Failure to follow this instruction may result in damage to the climate control assembly.
    G11424479

    Torque Specification: 1.3 Nm 

  5. CAUTION:
    • Take care not to damage the O-ring seals during installation.
    • A new O-ring seal is to be installed.
    G11424480

    Torque Specification: 5.3 Nm 

  6. CAUTION:
    • Take care not to damage the O-ring seals during installation.
    • A new O-ring seal is to be installed.
G11424481

Torque Specification: 3.5 Nm