General Specification

WARNING: This page is about a different car, the 2015 Jaguar XF, 2014 Jaguar XF, and 2013 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.

ITEM

SPECIFICATION

Type

2.0 litre, Inline 4, turbocharged and intercooled Gasoline engine, direct injection, twin overhead camshaft, 4 valves per cylinder

Cylinder arrangement

Inline 4

Cylinder numbering

No. 1 from Front of the engine

Bore - nominal

87.5 mm (3.44 in)

Stroke

83.1 (3.27 in)

Capacity

1999 cm³ (121.98 in³ )

Firing order

1 - 3 - 4 - 2

Compression ratio

10.0:1

Direction of rotation

Clockwise viewed at FEAD

Cylinder head maximum permitted warp (flatness specification)

0.2 mm (0.008 in)

Maximum power

All markets

176.5 kW (240 ps) @ 5500rpm

Maximum torque

340 Nm (250 lb-ft) @ 1750rpm

Engine oil pressure ⁽¹⁾

At 2000 rev/min

200-268 kPa/29.01-38.87 lb/in²

Balance shaft to crankshaft clearance ⁽²⁾

Maximum

0.101mm

⁽¹⁾	Prior to checking the engine oil pressure, a road test of 6 miles (10 kilometres) must be carried out. Do not attempt to attain normal engine operating temperature by allowing the engine to idle.

⁽²⁾	If the backlash between the balance shaft and crankshaft is greater than 0.101 mm then a new balance shaft assembly must be Installed.