LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2015 >> XFR-S >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Engine - V6 S/C 3.0L Petrol -- XF/X250) >> Engine - V6 S/C 3.0L Petrol >> Fuel Pump Camshaft (G1557238) >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2015 Jaguar XF, 2014 Jaguar XF, and 2013 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: Make sure that the mating faces are clean and free of foreign material.
    G11416148
  2. CAUTION: Take extra care not to damage the mating faces.
    G11416149

    Torque Specification: 12 Nm 

  3. G11416150

    Torque Specification: 21 Nm 

  4. G11416151
    • Install the lower timing chain making sure the coloured chain links align correctly with the fuel rail high-pressure fuel pumps camshaft, balance shaft and crankshaft sprocket markings.
  5. CAUTION: Make sure that the tensioner spring is correctly located.
    G11416152

    Torque Specification: 21 Nm 

  6. Refer to: Oil Pan Extension - RWD  (Engine - V6 S/C 3.0L Petrol, Removal and Installation).

    Refer to: Oil Pan - AWD  (Engine - V6 S/C 3.0L Petrol, Removal and Installation).

  7. Refer to: Battery Disconnect and Connect (Battery, Mounting and Cables, General Procedures).
scientia non olet · About LEMON Manuals