LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2015 >> XFR-S >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- XF/X250) >> Electronic Engine Controls - V6 S/C 3.0 L Petrol >> Description And Operation >> Electronic Engine Controls - System Operation And Component Description (G1791748) >> Manifold Absolute Pressure And Temperature (MAPT) Sensor

Manifold Absolute Pressure And Temperature (MAPT) Sensor

WARNING: This page is about a different car, the 2015 Jaguar XF, 2014 Jaguar XF, and 2013 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
G11417011

The MAPT sensor allows the ECM to calculate the air charge density immediately before it enters the cylinders. This is used to adjust the ignition timing relative to the boost pressure, and to monitor the performance of the charge air coolers.

The MAPT sensor is installed in the left charge air cooler outlet. The sensor is secured with a single screw and sealed with an O-ring. A four pin electrical connector provides the interface with the engine harness.

scientia non olet · About LEMON Manuals