Engage Speed Control
WARNING: This page is about a different car, the 2015 Jaguar XF, 2014 Jaguar XF, and 2013 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
Speed control is engaged by pressing the set speed accelerate '+' switch. Once engaged the speed can be increased by one of 3 methods:
- Press and hold the set speed accelerate '+' switch which will cause the vehicle to accelerate. When the switch is released the attained speed will be set as the cruise speed.
- Repeatedly pressing the set speed accelerate '+' switch. Each press increases the vehicle speed by 1 mph (2 km/h).
- Use the accelerator pedal to increase the vehicle speed. Once the required speed is reached, a single press of the set speed accelerate + switch will set the cruise speed.
When the target speed has been set, a green marker will appear on the outer circumference of the speedometer in the instrument cluster, adjacent to the set speed. If the set speed is changed the marker will move accordingly. If the speed control is cancelled the marker changes to a gray color until the resume switch is pressed to reengage speed control, when it changes back to a green color.