Rear Section

WARNING: This page is about a different car, the 2015 Jaguar XF, 2014 Jaguar XF, and 2013 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.

Exhaust gasses exits the resonator via two outlet pipes. The 2 pipes from the center resonator split the system into two sections which each connect to the pipes of the rear section and are each secured with a clamp. Each pipe has a welded hanger bracket which allow the rear section to be supported on mounting rubbers. A further bracket is welded to each pipe which braces the two pipes together. The two rear silencers each have a welded inlet pipe which mate with the outlet pipes from the resonator silencer and are each secured with a clamp. The fabricated rear silencers have two perforated tubes which are supported on two baffle plates. The exhaust gasses are expelled from the rear silencer via a single outlet pipe. The outlet pipe from each silencer has a welded hanger bar which supports the rear silencer on mounting rubbers. The outlet pipe is fitted with a polished stainless steel finisher which is secured to the silencer with a Torca clamp.