LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Wheels & Tires -- XK/X150 >> Wheels And Tires >> Tire Pressure Monitoring System Rear Antenna (G528346) >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Install the tire pressure antenna.
    • Install the clips.
    • Connect the electrical connector.
  2. Install the fender splash shield.
    • Tighten the Torx bolts.
  3. Install the wheel and tire assembly.

    For additional information, refer to: Wheel and Tire .

  4. Connect the battery ground cable.

    For additional information, refer to: BATTERY AND CHARGING SYSTEM - GENERAL INFORMATION .

scientia non olet · About LEMON Manuals