LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Wheels & Tires -- XK/X150 >> Wheels And Tires >> Tire Pressure Monitoring System Module - Convertible (G542801) >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. Remove the cover and disconnect the battery ground cable.

    For additional information, refer to: BATTERY AND CHARGING SYSTEM - GENERAL INFORMATION .

  2. Make the SRS system safe.
  3. Remove the LH roll over protection unit.
  4. Remove the rear seat RH backrest retaining bracket.
    G11504262
    • Remove the 2 nuts and 2 bolts.
  5. Remove the RH roll over protection unit.
    G11504263
    • Disconnect the electrical connector.
    • Remove the 4 Torx bolts.
  6. Release the auxiliary junction box mounting bracket.
    G11504264
    • Remove the 3 nuts.
  7. Remove the tire pressure monitoring module.
    G11504265
    • Remove the 2 nuts.
    • Disconnect the 2 electrical connectors.
scientia non olet · About LEMON Manuals