LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Vehicle Dynamic Suspension -- XK/X150 >> Vehicle Dynamic Suspension >> Adaptive Damping Module - Convertible >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Install the active damping module.
    • Tighten the nuts to 10 Nm.
    • Connect the electrical connectors.
  2. Install the RH roll over protection unit.

    For additional information, refer to: ROLLOVER PROTECTION UNIT (Removal and Installation)

  3. Connect the battery ground cable and install the cover.

    For additional information, refer to: SPECIFICATIONS .

scientia non olet · About LEMON Manuals